1579 Rodney Road
York, PA 17408
(717)757-5300
Customer Support
Mon-Thu: 8:00-5:00 Fri:8:00-3:00
Online store always open
ICECAST THIN: Crystal Clear Epoxy Casting 1:1
$44.00 – $175.00
ICETHIN is a two-component epoxy casting system. UV resistant, it has anti-yellowing properties, strong adhesion, good fluidity, natural defoaming. It is used for top coating or light casting with thicknesses from 1/16 inch (1.6 mm) to 1 inch (2.5 cm).
The low color and low viscosity allow for bubble-free, crystal clear castings ideal for art and hobby applications. It is formulated for a long gel
time, with low exothermic heat buildup.
ICETHIN has a low VOC content, for user safety and reduced environmental impact.
Details
PRIMARY APPLICATIONS
Embedding and encapsulation
Resin jewelry
Small castings
Bar, table, or countertop coat
Molding resin
Art or crafting resin
APPLICATION
In a dry, clean container mix 1 part of resin with 1 part of hardener. Stir well along the inner wall of the container
and then let it stand for 3-5 minutes. According to the operation time and dosage, adjust the amount of glue to
avoid waste.
When the relative humidity is greater than 85%, the surface of the cured product easily absorbs moisture in the
air to form a white mist. Therefore, when the relative humidity is greater than 85%, it is not suitable for curing at
room temperature. It is recommended to use warm curing. If it is to be ground, it needs to be 3 days after it is
fully cured.
