Smith Paints: Poly-WB semi-gloss / 1.5-gal Kit

$152.00

SKU Smith | poly-wb | 1.5 gal Categories COATINGS, Top Coats Tag Smith Paints Brand: Smith Paints

Smith’s Poly-WB is a 2-Component, High Performance Waterborne Polyester Polyurethane sealer used as a hard, durable protective or maintenance wear surface over decorative concrete, pavers, concrete stains, etc. with heavy foot traffic exposure. Developed for interior or exterior wear surfaces in residential & commercial installations to protect against long-term chalking in high U.V. exposure environments & for greater film thickness capabilities, better gloss retention, better chemical & stain resistance versus traditional 2-Component water-based Polyurethanes. Direct-to-concrete, stone and paver applications require a primer

HIGHLIGHTS:

Good Pot-life – 2 hours at 75°F / 50% Humidity
Ultra-Violet light stable
Very Good Stain & Chemical Resistance
High Performance
- Highly Abrasion Resistant topcoat
- Much more durable than traditional solvent-based Acrylic Sealers
Easy to Clean & Maintain
Wet Look – Enhances Colors
Non-Blushing
Dries Clear
- Solid Colors (Sold Separately)
Hot Tire Pickup Resistant
Low VOC’s – Meets Source Specific Standards Rule 1113 established by AQMD in California

Availability: In stock

Recommended as a Final Topcoat for Commercial & Residential:

Decorative & Stamped Concrete
Concrete Countertops
Terrazzo
Garage Floor Coatings
Sealer for Vinyl Chip resinous coating systems
Pavers

Product Data Sheet

All statements, recommendations and technical information passed on with this product are accurate to the best of knowledge of Smith Paint’s. The data relates only to the specific material designated herein. It may not be valid if used in combination with any other materials. It is the user’s responsibility to verify suitability of this information for their own particular use, and test this product before use.

*Consult Safety Data Sheet for further information